Choose a Product Line:
Have a technical question?
Call: 1.800.933.9220 Ext 2716
Codes & Construction
1Expansion Joints in Large Buidings
The normal recommendations for spacing Huber Engineered Wood panels are 1/8” at panel ends and edges. These spacing recommendations will accommodate most building situations. However, when the building exceeds 80 feet in length, the cumulative expansion of adjacent panels may bow joists, rim boards, and push end walls out of line. To address this...
2Exporting AdvanTech® Panels
Many countries have regulations for solid wood packing material (SWPM) imported from the United States. According to these regulations, all SWPM, bracing and dunnage made from coniferous trees need to be heat-treated and certified in order to prevent further introduction of the pinewood nematode as well as other wood destroying organisms.
3Performance Category Explained
This Technical Tip explains what Performance Categories are according to PS2-10 and how they relate to panel thickness
4Load-Span Tables for AdvanTech® Flooring and Sheathing
Allowable pounds per square foot loading based on deflection, bending and shear values.
5Attachment of Non-Load Bearing Walls to AdvanTech® SubflooringEchodrive
Foot traffic near interior walls can sometimes cause incremental movements resulting in noises from fasteners rubbing against the AdvanTech floor panel edges. To address this potential source of noise, the sole plate should be securely fastened to the floor joist system as shown below.
6LEED and Green Building
Green building programs are helping to increase the efficiency with which buildings use resources in regards to energy, water, and materials.
7Performance Catergory Explained
This Technical Tip explains what Performance Categories are according to PS2-10 and how they relate to panel thickness.
8What Makes AdvanTech Better?
Find out what distinguishes AdvanTech from the competition.
This Technical Tip explains HEW's third party quality assurance process that certifies ZIP System and AdvanTech panels as satisfying PS2 wood structural panel standard making them compliant with IBC and IRC requirements.